QEO FENNEL FLG 80-GREEN Tracking SP Bedienungsanleitung Seite 22

EN
D
OPERATION
SET UP THE INSTRUMENT
1. Onto a tripod: Connect the laser the to 5/8"
retaining bolt of a builder's tripod.
2. On the floor: Set up the laser on its floor tripod.
Set up the instrument as upright as possible by
means of the circular vial of the control panel to
allow the self-levelling system to function within
the range. Fine adjustment can be made with the
adjustable tripod legs.
FINE ADJUSTMENT SCREW
The laser can be rotated by hand or carefully by
use of the fine adjustment screw.
HEIGHT ADJUSTABLE SUPPORT LEGS
If necessary centre the circular bubble of the
control panel by means of height adjustable
support legs in order to reach the maximum
accuracy.
22