Panasonic TX-43MX600E Bedienungsanleitung Seite 313

Vivid Dimming
Noise Reduction
Film Mode
MEMC
MEMC Demo
Skin Tone
Colour Shift
Colour Tuner
Gamut Mapping
Gamma
HDMI Full Range
Reset
Sound Menu Content
Dolby Atmos
Mode
Surround Sound
Sound Output
Low, Medium, High and Off options are available. While Vivid Dimming is active, it
will enhance contrast locally for each defined zone.
Low, Medium, High and Off options are available. If the signal is weak and the picture
is noisy, use the Noise Reduction setting to reduce the amount of noise.
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature to Auto when you are watching films to see the fast
motion scenes clearly.
Press left/right buttons to set
active, it will optimise the TV's video settings for motional images to acquire a better
quality and readability.
MEMC
When option is set to Low, Medium or High, this option will be available. Press
OK button to activate the demo mode. While demo mode is active, the screen will be
divided into two sections, one displaying the
normal settings for TV screen. Press OK button again to cancel.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour
and Brightness values manually.
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as Off, the TV's
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
You can use this option to set your gamma preference. Press Left/Right directional
buttons to set to Normal, Bright or Dark.
Note: This option may not be available depending on the TV model and its features and you may not be able
to change this setting depending on the current content.
While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
Resets the picture settings to factory default settings (except Game mode).
Your TV supports Dolby Atmos technology. By means of this technology the sound moves
around you in three-dimensional space, so you feel like you're inside the action. You will
have best experience if input audio bitstream is Atmos. Auto, On and Off options will be
available. If set as Auto, the TV will switch between On and Off modes automatically
depending on the input audio bitstream information, if the input audio bitstream is Atmos
this feature will work as if it is set as On. Set as Off to disable.
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be greyed out and unavailable if set to an option other than Off.
Enables or disables the surround sound mode.
Sets the sound output preference. TV, S/PDIF, HDMI ARC, Headphone Only and
Lineout options will be available. There will be no sound output except through the
selected option and the headphone jack. Note that, if this option is set as Headphone
Only, TV speakers will be muted when headphone set is plugged in.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone Only. Please ensure before using headphones that this menu
item is set to Headphone Only. If it is set to Lineout, the output from the headphone
socket will be set to maximum which could damage your hearing.
If HDMI ARC option is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as greyed out and will be
unavailable.
English - 20 -
MEMC
to Low, Medium, High or Off. While
MEMC
MEMC
activity, the other displaying the
is