Panasonic TX-43MX600E Bedienungsanleitung Seite 307

Connections
Connector Type
HDMI
Connection
SPDIF
SPDIF
(Optical Out)
Connection
HEADPHONE
Headphone
Connection
USB
Connection
CI
Connection
LAN
Ethernet
Connection
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Cables
LAN / Ethernet Cable
English - 14 -
When using the wall mounting kit
Device
(available from a third party in
the market, if not supplied), we
recommend that you plug in all
cables before mounting the TV
on the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should refer
to the module instruction manual
for details of the settings. The/
Each USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. When connecting equipment
using a HDMI cable to your TV,
to guarantee sufficient immunity
against parasitic frequency radiation
and trouble-free transmission of
high definition signals, such as 4K
content, you have to use a high
speed shielded (high grade) HDMI
cable with ferrites.