Panasonic TX-43MX600E Bedienungsanleitung Seite 312

Settings Menu Content
Devices Menu Content
Virtual Remote
Audio Video Sharing
ALLM
Timer of No Signal
CEC
CEC Auto Power On
Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Picture Zoom
Picture Shift
Advanced Settings
Dynamic Contrast
Colour Temp
White Point
Vivid Blue
Enable or disable the virtual remote feature.
This feature allows you to share files stored on your smartphone or tablet pc. If you have
a compatible smartphone or tablet pc and the appropriate software is installed, you can
share/play photos, music and videos on your TV. See instructions of your sharing software
for more information.
ALLM (Auto Low Latency Mode) function allows the TV to activate or deactivate low
latency settings depending on playback content. If this option is enabled the picture
mode will be set to Game automatically when ALLM mode signal is received from the
current HDMI source. Refer to Game Mode section for more information.
If your TV does not receive any input signal (e.g. from an aerial or HDMI source) for
3 minutes, it will go into standby mode. You can enable or disable this functionality by
setting this option accordingly.
With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press Left or Right button to enable or
disable the feature.
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Note: Available options may differ depending on the input source.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and
Dolby Vision Bright picture mode options will be available instead of Cinema and
Natural modes.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. This option (will be located under the Energy
Saving setting) will be avai̇ lable if the Energy Saving is set to Custom. Highlight and
use Left/Right directional buttons to set.
Sets the desired image size format.
This option (will be located under the Picture Zoom setting) may be available depending
on the Picture Zoom setting. Highlight and press OK, then use directional buttons to
shift the picture upwards or downwards.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the 'warmth' or 'coolness' of the picture by
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
English - 19 -