Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In order to prevent an inadvertent reset of the calibration, a code is required to enter this menu.
The code is 1402.
ATTENTION: If a reset of the calibration is performed, the previously performed calibration
will be deleted and a default value for the sensor sensitivity will be selected. It is
recommended to perform a calibration after the reset.
The reset must be confirmed via the subsequent confirmation dialogue when one of the reset
options is selected. The device will perform a restart after the reset has been performed.
5.4
Manual
This sub menu leads to a screen with a QR code. This code can be decoded with a suitable
scanner like e.g. a mobile phone and it contains a link which directly leads to the manual of the
PCE-VT 3700 for easy access.
5.5
Info
This sub menu shows a screen with the device name and firmware version.
Fig. 12 Confirmation dialogue
© PCE Instruments
28
Werbung
