Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.4
Software
5.4.1
Installation
Device driver
1.
Download the latest version of the software from this website:
https://www.pce-instruments.com/english/download-win_4.htm.
2.
Connect the device to your PC by using the supplied USB cable. A notification
appears which asks you to install the "CP2102 USB to UART Bridge Controller".
3.
Extract the downloaded zip file.
Open the "USB Driver" folder.
4.
Start the "CP210xVCPInstaller_x64.exe" file if you run a 64 bit operating system or
5.
start the "CP210xVCPInstaller_x86.exe" file if you run a 32 bit operating system.
(If you are not sure which operating system is installed, right-click the computer icon
on your desktop and select "Properties". Now check "System type" to find out which
operating system you use.)
Software
1.
Download the latest version of the software from this website:
https://www.pce-instruments.com/english/download-win_4.htm.
2.
Connect the device to your PC by using the supplied USB cable. A notification
appears which asks you to install the "CP2102 USB to UART Bridge Controller".
3.
Extract the downloaded zip file.
Execute "Setup.exe".
4.
5.
Follow the instructions on the screen.
5.4.2
Operation
Turn on the device, connect it to your PC and start the software. Now you see the main screen:
© PCE Instruments
21
Werbung
Inhaltsverzeichnis
