CAMPAGNOLO EKAR 13S CRANKSET Bedienungsanleitung Seite 35

6 - C H A I N R I N G R E P L A C E M E N T
- Use a torque wrench to tighten the
screws to 8 Nm (71 in.lbs) (Fig. 11).
- Push the rocker downwards to reduce
the chain tension and reposition the chain
on the chainring (Fig. 12).
The correct chain length must be recalculated
if the number of teeth on the new chainring is 6
teeth more or less than on the old one (from 38
to 44 teeth or vice versa). If the change in the
number of teeth is less than 6, then the chain
length does not need to be altered.
Fig.11
Fig.12
ENGLISH
35
C A M PA G N O L O . C O M