Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Starting and adjusting the appliance
WARNINGS
Open door alarm
• An audible beep will let you know that your refrigerator door has been open for at least
60 seconds.
• At the same time, the warning light will switch on.
• To make the beep stop, press any button (+/-) or close the door. The light will remain
on until the door is closed.
• If this signal appears instead of the temperature, it means that the temperature
sensor are probably defective.
• A safety procedure starts automatically to ensure that the appliance can operate but
the Technical Assistance Department must be called.
• If this letter appears in place of the temperature, it means that there is a problem with
the electricity supply. An automatic testing procedure is initiated for 8 minutes and
then normal operation resumes.
ATTENTION
Your refrigerator's internal temperature is strictly dependent on the ambient temperature,
how frequently the appliance's door are opened and the amount and the temperature of the
food you have placed in the refrigerator. You must therefore regularly check the temperature
indicator on your refrigerator and adjust the temperature setting if necessary.
The temperatures that appear on the screen correspond to the requested temperatures and
not the actual temperatures.
35
EN
Werbung
