Battery Disposal - Petsafe In-Ground Fence System Add-A-Dog Bedienungsanleitung

IC
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of the device.
ACMA
This device complies with the applicable EMC requirements specified by the ACMA (Australian
Communications and Media Authority).

Battery Disposal

Separate collection of spent batteries is required in many regions; check the regulations in your area
before discarding spent batteries.
PIG19-10763
This device operates on one 9 Volt alkaline battery. Replace only with equivalent battery.
To remove the battery:
Remove the 4 screws with a cross-head screwdriver and remove the battery lid. Remove the old battery
pack. (Note: When removing the old battery pack, grip the wires to the battery plug firmly to avoid
damaging them).
PIG19-10764
This device operates on two batteries of the type Lithium 3-Volt with a 220 mAH capacity. Replace
only with equivalent battery received from the Customer Care Centre. For a listing of Customer Care
Centre telephone numbers, visit our website at www.petsafe.com.
To remove the battery:
Turn the battery anti-clockwise using the edge of the test light tool.
7
petsafe.com