Scooty CITY 26 PRO Bedienungsanleitung Seite 13

Mounting the pedals :
Use the R (right) and L (left) markings to identify them.
1. Mount the right pedal on the right crank arm. Tighten the pedal clockwise using the
wrench provided.
2. Then screw the left pedal onto the left crank arm counterclockwise.
Mounting the handlebar :
1. First orient the handlebars in the right direction.
2. Tighten the fixing screw on the stem using the wrench provided.
3. Check that the handlebars are correctly oriented.
Assembly and adjustment of the saddle:
Loosen the nut on the seat post clamp to be able to change the height of the seat
post in the frame.
Select a height and tighten the seat post clamp nut. When adjusting the saddle to
its lowest position, make sure that the saddle does not touch any component of the
bicycle such as the battery cover. Also, be sure not to exceed the minimum seat tube
insertion mark. This insertion mark should never be visible when using the bike.
IMPORTANT : To determine your saddle height, sit on the bicycle and place a heel on
the pedal in the down position with the crank parallel to the seat post. When your leg
is extended the saddle height is correct.
Recommended saddle height and user size:
Wheel dimensions
26''
*
Size for an «optimal» use of the device.
Maximum height of
the saddle
96 cm
13
Minimum saddle
height
84 cm
Recommended user
size*
165 - 185 cm
EN