EuroLite LED BB-5 Leiste Bedienungsanleitung Seite 23

STAND ALONE-MODE
Auto Mode
In Auto Mode the internal programs are called up automatically, each in a continuous loop.
Press the MODE button until the LED display shows "Auto" and press the ENTER button to confirm. You
can now choose one of the 12 internal programs via the the UP or DOWN buttons (Au 1 - Au12).
Please press the ENTER button to confirm and to attain speed setting.
The LED display shows "S 0".
The desired speed (S 0 - S100, increasing) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default Au 1)
Show Mode
Press the MODE button until the LED display shows "ShMd" and press the ENTER button to confirm. You
can now choose one of the 13 internal programs via the the UP or DOWN buttons (Sh 0 - Sh12).
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default Sh 0)
Static Mode
In Staic Mode you can set the desired brightness and strobe effect.
Press the MODE button until the LED display shows "Stat" and press the ENTER button to confirm
As soon as the LED display shows "WhIE" please press the ENTER button again. You can now choose the
desired brightness level via the the UP or DOWN buttons (W 0 to W100, increasing).
Please press the ENTER button to confirm.
To create a strobe effect, press the UP button until the LED display shows "Stro".
The desired speed (S 0 - S100, increasing) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default Dimer 100; Strobe 0)
Dimmer Mode
Press the MODE button until the LED display shows "diMd" and press the ENTER button to confirm. You
can now choose the desired dimmer speed via the the UP or DOWN buttons.
OFF: off
dM1: fast
dM2: middle
dM3: slow
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default Mode 3)
LED
Press the MODE button until the LED display shows "LEd". You can now choose the desired display
information setting via the the UP or DOWN buttons.
On: Display information remains on
30S: Display information switches off after 30 seconds
Please press the ENTER button to confirm and then the MODE button to attain the main menu.
(default on)
23/27 00074403.DOC, Version 1.1