Zibro SC 1832 Installations-Handbuch Seite 58

instal_SC1832.qxd 06-05-2010
IMPORTANT NOTICE:
Install this device only when it complies with local/national legislation, ordinances and standards. This pro-
duct is intended to be used as an air conditioner in residential houses and is only suitable for use in dry
locations, in normal household conditions, indoors in living room, kitchen and garage. Check the mains vol-
tage and frequency. This unit is only suitable for earthed sockets, connection voltage 230 V~ / 50 Hz.
This service manual is intended for use by individuals possessing adequate backgrounds of electrical, elec-
tronic, refrigerant and mechanical experience. Any attempt to install or repair the appliance may result in
personal injury and property damage. The manufacturer or seller cannot be responsible for the interpreta-
tion of this information, nor can it assume any liability in connection with its use.
The information, specifications and parameter are subject to change due to technical modifications or
improvement without any prior notice. The accurate specifications are presented on the nameplate label.
• Please read this installation manual completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized personnel
only.
• Installation work must be performed in accordance with the national wiring standards by authorized
personnel only.
• Always make sure to wear the correct personal safety protections such as protective eyewear, gloves,
mouthcaps, ear protection etc.
HOW TO ORDER SPARE PARTS:
To have your order filled promptly and correctly, please furnish the following information:
1. Model no. with indoor or outdoor
2. No. in the explosion view
3. Part name
4. The quantity you want to order
Internet:
For your convenience you can download the latest version of the user-, installation- and/or service manual
on www.zibro.com
4
58
10:55 Pagina 58