Bartscher 105.835S Bedienungsanleitung Seite 32

6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced by
customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer service
centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should carry
out repairs and maintenance of the device. Do not attempt to repair the device
yourself.
7. Possible Malfunctions
Error
Message
E01
E02
E03
Cause
• The device becomes too
hot (e.g. due to blocked
ventilation slots)
•
Parts are damaged (e.g.
transistor)
• Overheating-protection
was activated and the
device switched off.
• Temporary overvoltage,
device became too hot.
Solution
•
Clear/unblock ventilation slots.
Let the device cool off for a
few minutes; the device is
ready for operation afterwards.
Contact the retailer in case the
error message remains
indicated in the digital display
after the device has cooled off.
•
Contact retailer.
•
Remove the cookware from
the hob. Let the device cool off
for a few minutes. The device
is ready for operation
afterwards.
•
Remove the device from the
socket (remove the plug!). Re-
connect the device after
several minutes.
- 31 -