Bartscher 105.835S Bedienungsanleitung Seite 29

5.5 Operating
•
Plug the power plug into a suitable outlet.
•
An acoustic signal sounds. Now the device is in standby mode.
•
Place suitable cookware in the centre of the cooking zone.
•
Press the key
power mode flash up.
1. The preset power mode 5 is displayed and the device is activated.
You may change the power setting between the intervall of
by using key button
the chosen power mode.
1 = 800 W cycled
2 = 800 W cycled
3 = 1100 W
4 = 2000 W
NOTE!
These specifications may vary and depend on the type of cookware used.
2. ° C In case you do not prefer working with the power modes you may change into
temperature mode by pressing the key button for power mode or temperature
mode respectively.
The device now changes into the preset temperature setting of 120° C and
operates.
You may change the temperature setting between the range of 60 – 240° C at
any time by using key button
indicates the chosen temperature mode and the control lamp for
Temperature ( ° C) flashes up.
Temperature setting and according power performances of the device
60° C ________ 800 W
80° C ________ 800 W
100° C ________ 800 W
120° C ________ 1100 W
140° C ________ 1300 W
NOTE!
These specifications may vary and depend on the type of cookware used.
- 28 -
in order to switch on the device. The control lamps for ON and
and respectively. The digital display indicates
5 = 2300 W
6 = 2900 W
7 = 3000 W
and respectively. The digital display
160° C ________ 1400 W
180° C ________ 1700 W
200° C ________ 1750 W
220° C ________ 1750 W
240° C ________ 1750 W
at any time
8 = 3200 W
9 = 3400 W
10 = 3500 W