Bosch MMB617-Serie Gebrauchsanleitung Seite 38

en Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Malfunctions
Fault
The appliance is not work-
ing.
Appliance has a humming
sound.
Appliance switches off dur-
ing use.
38
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
Blender jug is not locked.
The blade is blocked or stiff.
Processing quantity is too
great or processing time
was too long.
Troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Set the rotary switch to ⁠ .
▶
Place the blender jug onto the base
1.
unit and rotate in a clockwise direc-
tion until it locks into place.
If required, select this option:
2.
Place the To-Go blender jug
‒
with the To-Go blade insert
onto the base unit and rotate
in a clockwise direction until
it locks into place.
Set the rotary switch to ⁠ .
▶
Remove the blockage.
▶
Set the rotary switch to ⁠ .
▶
Reduce the processing quantity.
▶
Allow the appliance to cool down to
▶
room temperature.