BDS Maschinen MAB 525 Originalbetriebsanleitung Seite 49

Key-type drill chuck
MAB 525
Inserting the tool
Push the key-type drill chuck (H) onto the tapered man-
‹
drel (F) and push the combination into the morse taper (3) of
the machine.
Open the drill chuck and insert the tool into the drill chuck.
‹
Close the drill chuck by hand and then tighten the drill chuck
‹
with the chuck key.
Removing the tool
Unlock the drill chuck with the chuck key and remove the
‹
tool.
WARNING
Risk of injury!
► Tighten the drill chuck only with the chuck key provided.
► Always remove the chuck key from the drill chuck after tight-
ening or loosening.
Preparations
49