Parameter Inquiry - Tekno Point ATHENA R32 A-0732 Installationsanleitungen

(4) heating + DHW mode (DHW priority)
When the unit is in heating status,
temperature of buffer tank; The right side of the screen shows the measured water temperature of buffer tank.
Press or
be set is 60°C.
When the unit is in DHW status,
temperature; The right side of the screen shows the measured DHW water temperature.
Press; to adjust the set DHW water temperature, the maximum DHW water temperature can be set is 55°C.
or to adjust the set DHW water temperature, the maximum DHW water temperature can be set is 55°C.
(5) Cooling + DHW (DHW priority)
When the unit is in cooling status,,
temperature of buffer tank; The right side of the screen shows the measured water temperature of buffer tank.
Press or
set is 8°C. When the unit is in DHW status,,
DHW water temperature; The right side of the screen shows the measured DHW water temperature.
Press or
set is 55°C.

10.2.2 Parameter inquiry

1 In main menu, press
button to inquire parameters.
2 In user parameter inquiry menu, if there is no operation for 30 seconds, will automatically exit user parameter
inquiry and back to main menu. Or press
flash on the screen, the left side of the screen shows the set water
to adjust the set water temperature of buffer tank, the maximum water temperature can
flash on the screen, the left side of the screen shows the set DHW water
flash on the screen, the left side of the screen shows the set water
to adjust the set water temperature of buffer tank, the minimum water temperature can be
to adjust the set DHW water temperature, the maximum DHW water temperature can be
button for 3 seconds to enter user parameter inquiry menu, press
Heating+ DHW status
flash on the screen, the left side of the screen shows the set
Cooling+ DHW status
button to back to main menu.
or
91