Atag DW8215MT Gebrauchsanleitung Seite 195

Settings
3. Automatic child lock
4. Display
5. Sound
6. Rinse aid
7. Water hardness
Alternatives
On/Off
Contrast 1/2/3/4
Program Info screen T/S
Feedback 0/1/2/3
Notification 0/1/2/3
0/1/2/3/4/5
0/1/2/3/4/5/6/7/8/9
You can activate the Automatic child lock
setting to prevent children from starting the
dishwasher.
To temporarily deactivate or activate the
Automatic child lock setting, press and hold
and for three seconds.
For adjusting the contrast of the display.
You can select which information is shown
on the display.
T-Text
S-Symbol
A beep confirms that the control panel has
been pressed.
The buzzer indicates when a dishwashing
program has ended.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
See Water hardness in the chapter Before
washing for the first time.
For a water supply with a hardness below
6°dH (10°fH / 7°eH / 1.0 mmol/l), select 0.
The water softener is deactivated and no salt
needs to be added.
Settings
29