Wifi Connection; Atag Connect Life; Preparations; Connect To A Network And Pair - Atag VA8217LT Gebrauchsanleitung

WiFi connection

ATAG Connect Life

You can remote control this dishwasher with your smartphone/tablet. Connect the dishwasher to
your wireless network to be able to remote control and start the dishwasher using the ATAG Connect
Life app. The app can be used to find information, change settings, start a program and monitor the
dishwasher. (The dishwasher can always be used without the app.)
WiFi
On/Off

Preparations

Your smartphone/tablet must be connected to the internet.
The router in your wireless network must be connected to the internet and the dishwasher must
be in range of your wireless network.
Use your smartphone/tablet to download the ATAG Connect Life app from the appropriate app
store or scan the QR code below.
You will find the dishwasher's QR code (and the AUID code) on the serial number plate.

Connect to a network and pair

Connect the dishwasher to your wireless network and pair with your smartphone/tablet. (This can
also be done from the dishwasher's Settings menu.)
Open the ATAG Connect Life app and register an account.
Go to Appliances. Click on Add appliances or the + button. Select Home appliances.
Scan the dishwasher's QR code (see the serial number plate). Follow the further instructions in
the app.
Open the dishwasher door and press
On the dishwasher's control panel: Press
On the dishwasher's control panel: Press and hold
Network symbol on the display
Flashing 0.5 sec on/off
Flashing 1.0 sec on/off
28
Display
AUID code (37 digits)
.
to activate the WiFi module.
The dishwasher is ready to be connected to your wireless network or
paired with your smartphone/tablet.
The dishwasher is connected to your wireless network.
QR code
for 3 seconds to initiate Connection setup.
Start/Stop