EINHELL NEW GENERATION STE 5500 Bedienungsanleitung Seite 11

Anleitung STE 5500 SPK1
15. Troubleshooting
Fault
Engine does not start
Generator has too little or no
voltage
21.09.2006 13:06 Uhr Seite 11
Cause
Automatic oil cut-out has not res-
ponded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
GB
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
11