Olympia PS 21 CCD Bedienungsanleitung Seite 11

The PS 21 CCD shredder may only be used to shred paper, CDs or credit cards in the
infeed slots provided. The material to be shredded must be dry and must correspond to
the specifications listed in the technical data. Shredding other materials can lead to
injuries (for example, if solid material splinters) or damage to the device (destruction of
the cutting unit, etc.).
Do not shred endless paper documents with this device. Remove all paper clips and
staples before feeding paper into the device.
The device may only be used indoors in dry rooms.
Take the device carefully out of the packaging. Insert the inner collecting basket (for CDs)
in the paper collecting basket. Plug the mains cable into the socket. Please observe the energy
supply specifications on the back of the device in your safety measures.
The socket and the mains connection of the device must be freely accessible for safety
reasons so that the power supply can be disconnected in emergencies.
The sliding switch (Auto, Off, Rev / CD) on the device has the following
functions:
Auto position: the device is ready for operation.
The device is equipped with microswitches. Shredding operating of the respective
cutting unit starts automatically as soon as paper is fed through the infeed slot.
The device runs forwards and draws the paper in.
-
The device switches off automatically after the shredding cycle.
-
Rev / CD position: Insert the individual CD or credit card in the respective infeed slot in the
cutting unit.
The cutting unit runs in reverse. To hold the rest of the paper back, you can push the
sliding switch in the Rev / CD position and the cutting unit pushes the paper
back.
Off position: The device is switched off.
Clear key: If paper remains in the cutting mechanism, press the Clear key to start the
motor to shred the residual paper.
Caution: the sheet capacity given in the technical data may not be exceeded as oth-
erwise a paper jam will occur. Remember that the thickness of the paper increases when
it is folded and the recommended sheet capacity may be exceeded in this way. Reduce
the quantity of paper fed if it is coarse fibre paper.
it is recommended not to fill the paper collection basket up to the cutting unit. This
prevents cut material becoming jammed in the cutting unit.
Empty the paper collection basket at regular intervals.
Intended use
Starting up
Operation
11