eta ECOlogic Bedienungsanleitung Seite 15

EN
2
„TARE" function
To weigh different loads consecutively without removing loads from the scale. Put first Load on
the scale, get weight reading. Press A4 TARE button to reset the LCD reading to „0" before
adding next load. The display will show "Tare" at the bottom. Add another item and the display
will read the added weight. You can repeat this operation. If all products are taken away from the
weighing plate,a negative value will appear on the display.
3
TARE
Note
When total sum of all loads on scale ≤ 100 g, LCD will show „0" each time TARE is pressed.
The sum of all items must not exceed 5 kg.
Attention
Remove the excessive weight product from the scales to avoid damage to the appliance.
Error messages shown on the scale display (see Fig. 4)
4
1. Battery symbol — low charge, turn panel A6.
2. EEEEE — scale overload, the weight exceeds 5 kg
If symptoms such as flashing of the display or erroneous indications
appear, remove the scales away from disturbing sources
(e.g. microwave oven) or turn off the source for the term of weighing.
15 / 31