Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Remote Controlbattery - avidsen V250 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 128
F - MAINTENANCE AND UPKEEP
be disposed of at local waste treatment centres
(centres for sorting recyclable materials), which
are required to accept them.
Keep batteries, button cells and accumulators out
of reach of children. Store them in a safe place
that is not accessible to children. They could be
swallowed by children or pets. Risk of death! In
the event that a battery is swallowed, immediately
contact a doctor or go to A&E!
Never short-circuit the batteries, and do not burn
or recharge them as they may explode!
This logo denotes that devices no longer
in use should not be disposed of as
household waste. They are likely to
contain hazardous substances that are
dangerous to both health and the
environment. Return the equipment to
your local distributor or use the recycling collection
service provided by your local council.
3.1. REPLACING THE REMOTE CONTROL
BATTERY
When the remote control range is very reduced
and the red indicator is weak, this means that
the remote control battery will soon run out. The
batteries used in the remote control are 27A type
and are connected to one another. Replace the
battery with a battery of the same type as originally
used.
• With a Philips screwdriver, remove the 3 screws
behind the remote control.
• Open the remote control and remove the
batteries.
• Insert the new batteries, respecting the polarity.
• Close the remote control and screw in the
fastening screws.
EN
38

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

114166

Inhaltsverzeichnis