Flight Operation Steps - Modster EC-135 Betriebsanleitung

Manual

Flight Operation Steps

1.Turn on the transmitter and let helicopter stay near to transmitter.
2.Install the aircraft battery in the battery compartment safely and securely.
Press the power switch for 2 seconds to turn on the aircraft power.
3.The lights of the helicopter and the remote control flash at the same time. Then
push the throttle stick from top to bottom quickly. The remote control makes a
‚DI' sound, and the indicator lights of the helicopter and remote control are al-
ways on, which means binding successful.
4.Pull the two joysticks to outer eight angles to start the helicopter. (You can also
press the one-key takeoff button to take off the helicopter directly.)
5.Keep the helicopter head forward, and keep safe distance with the helicopter.
6.When manually operating the aircraft to land, please keep the throttle stick at
the bottom for 2-3 seconds, and then release it after the propeller has completely
stopped rotating.
(This operation is not required when using the one-key landing function)
Note:
1. In order to avoid hitting, do not look at the helicopter at hip level when it fly.
2.In order to avoid distractions, please confirm without other transmitters at
work around.
Corresponding to step 1C
12
orresponding to step 3C
MODSTER EC-135
orresponding to step 4
www.modster.at