Cleaning The Appliance - Philips HD6105 Bedienungsanleitung

EnglisH
12
5 Pour out the oil or fat (Fig. 15).
preclean function
This appliance is equipped with a PreClean function, which allows you to soak the inner bowl with
hot water and washing-up liquid to make cleaning easier.
Make sure you have removed the oil or fat from the inner bowl before you use this function.
1 Fill the inner bowl with cold water up to three quarters of its capacity and add some
washing-up liquid. (Fig. 16)
2 Put the plug in the wall socket.
3 Switch on the appliance (Fig. 7).
4 Set the temperature control to the PreClean function. (Fig. 8)
The water is heated to a temperature just below boiling point.
,
5 After 30 minutes, switch off the appliance and unplug it.
6 Pour the water out of the inner bowl and clean the bowl as described below.

cleaning the appliance

1 Clean the bowl, the lid and the frying basket with hot water and some washing-up liquid.
Rinse them with fresh water and dry them thoroughly.
The lid and the frying basket can also be cleaned in the dishwasher.
2 Clean the housing of the fryer with a moist cloth (with some washing-up liquid) and/or
kitchen paper.
You can clean the timer with a moist cloth.
Never immerse the fryer housing or the timer in water.
Make sure that all parts are dry before you fill the fryer with oil or fat.
storage
1 Let the oil or fat cool down for at least 4 hours before you store the fryer.
2 Put all parts back into/onto the fryer and close the lid.
3 Push the cord into the cord storage compartment. (Fig. 6)
4 Lift the fryer by its handles and store it (Fig. 17).
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 18).
- Batteries contain substances that may pollute the environment. Do not throw away batteries
with the normal household waste, but dispose of them at an official collection point for
batteries. Always remove the timer battery before you discard and hand in the timer at an
official collection point.
Removing the timer battery
1 Use a small flat-blade screwdriver to remove the front of the timer (Fig. 19).
2 Remove the battery.