Technical Data; Installation Instructions - SBC ALD1B5FD Montage- Und Bedienungsanleitung

Assembly and operating instructions
32 A Single Phase active power energy meter with Modbus interface, Pic. 1
Description
Energy meter with Modbus interface enables the reading of
all relevant data like consumption, current, voltage, power
(active and reactive) and cos phi.

Technical data

■ Pic. 2
Connection
diagram
■ Pic. 3
Dimensions
■ B according to EN50470-3,
Accuracy class
1 according to IEC62053-21
■ I
Reference, Maxi- = 5 A, Im
ref
mum, initial current
■ 230 V
operating voltage
AC
Tolerance −20%/+15%
■ 00 000,00...999 999,9 kWh
Counting range
■ Conductor cross-section max. 6 mm
Connections
Main circuit screwdriver pozi no. 1, slot no. 1,
torque 1,2 Nm
■ Conductor cross-section max. 2,5 mm
Connections
Control circuit screwdriver pozi no. 0, slot no. 1,
torque 0,5 Nm
■ −25... +55°C (noncondensing
Operating
temperature according standard EN50470)
■ Mechanical M2
Environment
Electromagnetic E2
Indicating elements (Pic. 4)
unidirectional:
■ Indicates the total consumption
T total (kWh)
■ Indicates the partial consumption.
T part (kWh)
This value can be reset
■ Indicates the instantaneous power
P (kW)
■ Pulsates according to the amount
2000 pulses/kWh
of used power. Error indication
(line 1L/2L inverted) with pulse of
600/600 ms.
bidirectional:
■ Indicates the total consumption
T (kWh)
■ Indicates the total feeding back
T (kWh)
■ Indicates the instantaneous power
P (kW)
Current
Current
■ Pulsates according to the amount
2000 pulses/kWh
of used power.
common:
■ Indicates the voltage
U (V)
■ Indicates the current
I (A)
Made in Romania
4 319 5115 0 K
Notes before connecting
In order to avoid moisture in the meter due to condensate
build-up, acclimatise the meter at room temperature for
about half an hour before connecting.
Attention!
These devices must only be installed by a professional
electrician, otherwise there is the risk of fire or the risk of
an electric shock.
Operation of the LCD display
= 32 A, Ist 20 mA
ax =
See page with LCD menu navigation.
, 50 Hz

Installation instructions

The energy meter can be attached to a 35 mm rail
,
2
(EN60715TH35).
The meter can be used only in installation cabinets.
,
2
Declaration of Conformity CE
We, Saia-Burgess Controls AG, CH 3280 Murten (Switzer-
land), herewith declare, on our own responsibility that
the products:
which this certificate refer to, are in accordance with the
directive 2004/22/EG (MID) and the following standards:
ESD on equipment side: 13 kV.
Conformity Assessment Body:
Givisiez, February 2022
Signed: Maarit White, EMEA Quality Leader - BMS
= consumption (pos.)
= feeding back (neg.)
2022-02-28
■ ALD1D5FD00A3A00
■ ALD1B5FD00A3A00
■ EN50470 parts 1 and 3 (electronic meter), of
October 2006.
METAS-Cert, Nr. 1259
CH-3003 Bern-Wabern
UK Importer Address:
Honeywell Building Technologies
Building 5 Carlton Park
King Edward Avenue
Narborough, Leicester LE19 3EQ
Subject to change without notice
English