Proper Use; Operation; Safety; Putting Into Operation - Beurer UB 90 Gebrauchsanweisung

3. Proper Use

CAUTION
This heated underblanket is designed for warming beds, only.

4. Operation

4.1 Safety

CAUTION
This heated underblanket is equipped with a SAFETY SYSTEM. This sen-
sor technology prevents the entire surface of the heated underblanket from
overheating by automatically switching off the heated underblanket in the
event of a fault.
If the safety system has switched off the heated underblanket, the tempera-
ture setting is not illuminated any more even when the heated underblanket
is switched on.
Please note that the heated underblanket is not operable any more due to
safety reasons in this case and has to be sent to the service address indicated.

4.2 Putting into operation

Spread out the heated underblanket flat onto your mattress starting at the foot end.
Then put on your bedsheet in the usual manner so that the heated underblanket is between your mattress
and the bedsheet
CAUTION
Make sure that the heated underblanket is spread out entirely flat and that it will not rumple up or
crease when in use.
• To operate the heated underblanket connect the switch to the heated underblanket by plugging in the
connector.
• Then plug in the supply plug into the mains outlet.
Additional information UB 100
The area intended for the head cannot
be heated.
Guide the plug-in coupling plug through
the slot on the side section [9] and then
connect the switch to the electric under-
blanket by plugging together the plug-in
coupling [8] (see figure).
Then pull the side section over the sides of your mattress like a fitted sheet. The electric underblanket is de-
signed to fit 90 x 200 cm as well as 100 x 200 cm mattresses. If the cable length is insufficient, you can order
a longer power supply cord with the material number 108.553 from our specified Customer Service. Then fit
your fitted sheet as usual with the electric underblanket positioned between your mattress and the fitted sheet.
14