What To Do If - IKEA HW507 Bedienungsanleitung

ENGLISH
Replacing bulbs
1. Disconnect the hood from the electric
power supply.
2. Replace the damaged lamp.
3. Only use 20W max - GU4 - 12V - Ø
35mm - 30° - Dichroic halogen lamps,
making sure not to touch them.
IMPORTANT: make sure you don't touch the
lamp with your hands.
What to do if ...
Problem
The appliance does not work
The hood's suction level is not
enough
The light does not work
Possible cause
There is no mains
elctrical power
The appliance is not
connected to the
electrical supply
The suction speed is too
low
The filters are dirty
The air vents are
obstructed
The light bulb is broken
The light bulb is not
correctly fitted
Solution
Check for the presence of
mains electrical power.
Turn off the appliance and
restart it to see if the faults
persists.
Check if the appliance is
connected to the electrical
supply.
Turn off the appliance and
restart it to see if the faults
persists.
Check the suction speed and
adjust as necessary
Check that the filters are clean
If not, clean the filters in the
dishwasher.
Check the air vents for any
obstructions and remove as
necessary.
Check the light bulb and
replace it if necessary.
Check that the light bulb has
been correctly fitted.
If not, fit the light bulb in right
way.
9