IKEA HW507 Bedienungsanleitung Seite 6

ENGLISH
Use
The hood has been designed to be installed
and used either as a "Exausted model", or
as a "Recirculation Model".
Exhausted model (see symbol
installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fitted to the hood steam
outlet.
Ensure that the discharge duct is correctly
fitted to the air outlet, unit using an
appropriate connection system.
Important: If already installed, remove the
carbon filter/s.
Recirculation model (see symbol
the installation booklet)
The air is filtered through one or more the
carbon filters, and then resent into the room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied without
carbon filters, these must be ordered and
fitted before the hood can be used.
The hood should be installed away from
particularly dirty areas, windows, doors and
heat sources.
The hood is sold with all necessary
in the
components for installation on most types of
walls or ceilings. However, ask a qualified
technician to check that the items supplied
are suitable for the type of wall/ceiling.
Keep this booklet for future consultation.
in
6