Basic Operations; Advanced Cd Or Mp3 Disc Playback; Repeat Play; Random Play - Pioneer X-HM26 Bedienungsanleitung

05 Disc playback

Basic operations

Function Main unit
Play
Stop
Pause
Track up/
down
Fast
forward/
reverse
16
En
Remote Operation
control
Press in the stop mode.
Press in the playback
mode.
(when playing a CD)
"RESUME" is
displayed and the
place where you
stopped play is
memorized. Press
again and the
memorized position
is cleared.
Press in the playback
mode. Press 1; to
resume playback from
the paused point.
Press in the playback
or stop mode.
If you press the button
in the stop mode, press
1; to start the desired
track.
(when playing MP3)
You can only skip
forward or back to
music files inside the
same folder.
Press and hold down in
the playback mode.
Release the button to
resume playback.

Advanced CD or MP3 disc playback

Repeat play

Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press repeatedly until "REPEAT ONE" appears. Press
ENTER.
To repeat all tracks:
Press repeatedly until "REPEAT ALL" appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play (CD)" section
(page 17) and then press
ALL" appears. Press ENTER.
To cancel repeat play:
Press repeatedly until "REPEAT OFF" appears. Press
ENTER.
Note
• After performing repeat play, be sure to press ∫.
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.

Random play

The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until "RANDOM ON" appears.
Press ENTER.
To cancel random play:
Press RANDOM repeatedly until "RANDOM OFF" appears.
Press ENTER.
Note
• If you press the 9 during random play, you can move
to the track selected next by the random operation.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
repeatedly until "REPEAT