Levenhuk Ermenrich Reel WM10 Bedienungsanleitung Seite 4

Ermenrich Reel WM10/WM20/WM30 Digital Measuring
EN
Wheel
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the
device only as specified in the user manual.
Getting started
•
Open the battery compartment cover and insert 2 AA batteries. Close the cover.
•
The length of the handle can be adjusted to the height of the user. To set the desired handle length, open the handle lock, extend the
telescopic handle, and then lock it in place.
•
Before starting measurements, always lift the stand. It is not recommended to measure with the stand unfolded.
Usage
•
To accurately measure the distance between two points, set the wheel on the beginning point, push the ON/OFF button and walk to
the end point. With the handle in the same position as it was when measurement started, read the distance directly from the counter.
The measurement results will appear on the LCD screen.
Settings
•
ON/OFF. Press the power button to turn the device on/off. When the device is on, the display will show 0.0.
•
M/FT | UNITS. Unit conversion. Press the button to switch between metric and imperial units of measurement.
•
SM | SAVE. Data storage. Press the button to store the memorized data (max. 5 records: M1-M5).
•
HOLD. Freeze mode. If you want to move the device, press the HOLD button to freeze the readings.
•
RM | MEMORY. Memory recall. Pressing the button once displays the data stored in M1, twice – M2, etc. When the RM function is on, the
"R" symbol appears in the upper right corner. After 2 seconds, the function automatically turns off and displays the current measurements
again.
•
CLR | CLEAR. Data reset. Press the button once to clear the measurements.
Specifications
Measurement distance (m, FT)
Units of measurement
Accuracy, %
Spacing (in increments), m
Height (unfolded), cm/in
Wheel diameter, cm/in
History record
Operating temperature range, °C/°F
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Use the device only as specified in the user manual. Keep away from children. Do not try to disassemble the device on your own for any
reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact
and excessive mechanical force. Do not use the product in explosive environment, close to flammable materials. Store the device in a dry
cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate
a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention
immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as
prescribed by your country's laws.
WM10
1–99999.9
m, ft
90/35
16/6
–10... 45/14... 113
2pcs AA batteries
4
WM20
±0.3
0.1
97/3.1
32/12
5 sets
WM30
1–100000
ft, in, m, cm
100/39