Respekta AC178IX-18 Bedienungs- & Installationsanleitung Seite 64

Levelling
Stabilise the refrigerator by means of the front levelling
feet (height adjustable). Adjust the feet with a spanner:
turn clockwise "A" to raise the refrigerator or anti-
clockwise "B" to lower it (the rotation direction is the
same for the left-hand door and the right-hand one). If
the refrigerator is not correctly stabilised, the door seals
may become distorted, thus preventing the appliance
from working correctly. In addition, the appliance
may vibrate anomalously. After having positioned the
refrigerator, wait at least 4/6 hours before using it, to
allow the refrigerant to settle.
WARNING: Do not install the appliance
too close to the wall, to avoid noisy
operation or blackening of the surfaces;
follow the guidelines in (Fig.5.1).
5.3.2 Bottle shelves
To fit the door shelves, hold the shelf at both sides and
first insert the part on the guide (1) side, then insert the
other part. When guide (1) clicks into position, the shelf
has been installed.
To remove the shelves, hold both sides of the shelf and
expert outward pressure on the side of the shelf without
the guide. Now remove the shelf.
A
1 1
B
Fig. 5.2
Fig. 5.3
en-29