Respekta AC178IX-18 Bedienungs- & Installationsanleitung Seite 63

NOTE: The quantity of refrigerant in the refrigerator is shown on the nameplate.
Heat dissipation space
During operation, the refrigerator emits heat into the surrounding environment. Therefore, it is important
to leave at least 30 mm of clearance at the top, 100 mm at both sides and more than 50 mm at the rear
of the appliance.
318 mm
WARNING: Do not cover the appliance ventilation outlets/grilles.
NOTE: The figure shown here illustrates the appliance dimensions schematically.
Supporting surface
Install the refrigerator on a solid and flat floor surface to keep it stable, otherwise it may be subject
to vibration and noise. If the refrigerator is standing on flooring materials such as carpet, mats, or
polyurethane, interpose solid supports/boards under the appliance to prevent deterioration of the
aforementioned flooring materials due to heat dissipation.
en-28
911mm
1655 mm
50 mm
911 mm
426 mm
636 mm
100 mm 100 mm
Fig. 5.1