Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions:
● Hold down the 'Forward' and 'Back' button for three
seconds to start – The LED light will flicker.
● Turn on the power for the car – the LED will light up.
● Press 'S' to choose your speed. When one LED is lit, the
product will operate at low speed, two lit LEDs is
medium speed and three lit LEDs is high speed.
● Press 'P' to break – all LEDs will flicker.
● If no button is pressed after 10 seconds, the remote will
enter standby. Press any button to start using again.
First, remove the nut and a gasket from the front axle, then install the wheel, gasket
and nut onto the front axle in turn, tighten the nut with a wrench, and finally install
the wheel cover on the wheel. Install the front wheel on the other side in the same
way.
4
Werbung
Inhaltsverzeichnis
