General Information; Operating Environment - Sygonix 2522662 Bedienungsanleitung

Operating Instructions
Tower fan
Item No. 2522662
1 Intended use
The product is designed as a fan with oscillating action for indoor use. The fan speed can be
adjusted to three different settings. Oscillation as well as fan speed can be set using the speed
switch.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery content
Tower fan
Stand (2-piece)
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.

5.1 General information

The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an au-
thorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.

5.3 Operating environment

Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
Operating instructions
www.conrad.com/downloads or scan the QR code
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Before connecting the appliance to the power supply, check that the power supply voltage
and current rating corresponds with the power supply details shown on the appliance rat-
ing label.
This device is not intended to be used by persons (including
children) with reduced physical, sensory or mental abilities
or lack of experience and / or lack of knowledge unless they
are supervised by a person responsible for their safety or
have received instructions on how to use the device.
Children should be supervised to ensure that they do not
play with the device.
To protect children from the hazards of electrical devices, never leave the device unat-
tended. For this reason, choose a storage place out of the reach of children. Make sure the
cable does not dangle down.
Never touch the product with wet or moist hands.
The device was constructed according to protection class II. Only a proper mains socket
(230 V/AC, 50 Hz) of the public supply net must be used as voltage source.
Never pour any liquids over electrical devices or put objects filled with liquid right next to
the device. If liquid or an object enters the interior of the device nevertheless, first power
down the respective socket (e.g. switch off circuit breaker) and then pull the mains plug
from the mains socket. Do not operate the product anymore afterwards, but take it to a
specialist workshop.
Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. Allow the device to reach
room temperature before connecting and using it. This may take several hours.
To protect against electric shock, never immerse the cable, the plug or the device itself in
water or other liquids.
Do not operate the fan near open windows in order to prevent short-circuits caused by
dripping water or rain.
Make sure that no objects such as textiles can get caught in the product.
Never leave the product unattended when in use.
Disconnect the mains plug from the wall socket after each use and before cleaning.
Never cover the product when in use.
Risk of injury! Do not insert any objects or fingers through the protective grid while the
product is in operation.
Disconnect the fan from the power supply before moving it.
The mains outlet must be located near to the device and be easily accessible.
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
For safety reasons, always unplug the device in case of a thunderstorm.
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress. Avoid excessive thermal stress on the mains cable from extreme
heat or cold. Do not modify the mains cable. Otherwise the mains cable may be damaged.
A damaged mains cable can cause a deadly electric shock.
Do not touch the mains cable if it is damaged. First, power down the respective mains
socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug from
the mains socket. Never use the product if the mains cable is damaged.
To prevent risks, damaged power cables may only be replaced by the manufacturer, a
professional workshop appointed by the manufacturer, or a similarly qualified person.
Never plug in or unplug the mains plug when your hands are wet.
The device may be used for household purposes only and for its intended purpose.
Place the device on an even, stable surface. Maintain a safety clearance of at least 10 cm
on all sides of the product.
The device is not suitable for installation.
Never move the device by tugging the cable and make sure the cable does not become
entangled.
Never wrap the cable around the device and do not bend the cable.
Never use the device in the direct vicinity of a heat source.