Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Operation - Balance KH 5555 Anleitung

Fußsprudelbad
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Content_IB_KH5555_56_KA.qxd

3. Technical Data

Rated voltage: ............220-240 V / ~50 Hz
Power rating:....................................106 W
4. Functions of the foot
bubble bath
This foot bubble bath has three distinct
functions, which can be used in various
permutations and combinations:
1. Bubbles: The air emerging from the air
nozzles forms bubbles, which massage
the feet in a gentle and pleasant manner.
2. Heat: The foot support plate gets
heated and maintains a constant water
temperature.
3. Massage: The foot plate with the small
massage knobs vibrates and generates a
pleasant massage effect.

5. Operation

Setting-up
Place the foot bubble bath on the floor
in front of a chair.
Set the function switch on
Placing the insets in the foot support
plate
Select the insets for the footplate.
Use the roll massage insets for an
additional spot massage of the foot
soles.
Opt for the acupressure inset with the
knobs for a gentle vibration massage.
13.07.2004
10:20 Uhr
Place the insets in the recesses meant
for them in the footplate. The recess
and the insets are marked with "L" for
left and "R" for right.
Fitting the massage attachments
Select a massage attachment for spot
massage.
Finger massager: for massaging the
feet with 4 fingers.
Acupressure massager: for Shiatsu
Massage (Asian massage with finger
pressure) of the feet.
Roll massager: stimulating rolling mas-
sage of the foot soles to relax the feet.
Simply place the massage attachment
in the opening on the elevated part
between the two foot beds.
Fill water
Warning!
Danger of an electric shock!
• Fill the water tub only up to the "MAX"
mark. Otherwise the water could over-
flow during the foot bubble bath.
• Connect the appliance to the mains
only after you have filled water.
(OFF).
Fill the water bath with warm or cold
water.
Note: The purpose of the heating function
is not to heat cold water.It is used in order
to maintain the temperature of the water
filled in the foot bath.
You can also use special bath additi-
ves. However, please refrain from using
foam-producing bath additives.
14
Seite 14

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis