Group Selection - AUDIOropa A-5211-0 Bedienungsanleitung

How to use
2.2 Power ON / OFF
Slide the ON/OFF switch upwards to switch the
device on. The LC-display will light up and the
currently selected group number is shown.
To switch the device off after use: Slide the ON/
OFF switch back to the lower position.
2.3 Transmission
Transmission will start as soon as the device is
switched on. The symbols , »MASTER« und
»TALK« are indicated.

2.4 Group selection

Switch the device off. Then press and hold both

the » « and »  « buttons while switching the
device on.
The symbol „GRP« in the display will blink. Select
a group number of your choice between 00 and

39 by pressing the » « and »  « buttons. After
the selection, wait for 5 seconds to set the chosen
group number.
The »GRP«-symbol will stop to blink and the selec-
ted group number is displayed.
English 13