Mains Connection; Battery Operation - KERN&SOHN EOS 150K50XLF Betriebsanleitung

7.3 Mains connection

On the bottom side of the display unit or of the platform there is located the mains
connection. Two mains adapters are delivered.
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage. Only use original KERN mains adapters. Using other
makes requires consent by KERN.
Fig. Mains connection platform:
Connection of mains
adapter

7.4 Battery operation

On the rear side of the display unit – the platform remove the battery cover and
connect 6 x 1.5V mignon cells. Reinsert the battery cover.
In order to save the battery, the balance switches automatically off after 3 minutes
without weighing. Further shutdown times can be set in the Menu (Function
"A.OFF"), see chap. 10.
If the batteries are exhausted, the battery symbol will appear (see chap.3). Switch-off
balance and replace batteries at once.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.
Fig. Battery compartment - platform:
EOS_F-BA-e-1613
Battery compartment - platform
13