Technical Data - WAGNER WallPerfect W 615 I-Spray Originalbetriebsanleitung

GB

23. Technical Data

Max. viscosity:
Power source:
Power consumption:
Atomizing output:
Max. delivery rate
Double insulation:
Sound pressure level*:
Sound pressure output*:
Oscillation level*:
Air hose length:
Weight:
* Measured in accordance with EN 60745-1
Information about the oscillation level
The specified oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention! The vibration emission value can differ from the specified value when the
electric tool is actually in use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating personnel. These measures
are based on an estimated shutdown during the actual conditions of use (all parts of the
operating cycle are taken into consideration here, for example periods when the electric
tool is switched off, and, when it is switched on but running without any load).
30
Technical Data
3400 mPas
230 V , 50 Hz / 240 V
~
460 W / 485 W
130 W
230 ml/min
72 dB (A); Uncertainty K = 4 dB
85 dB (A); Uncertainty K = 4 dB
< 2.5 m/s²; Uncertainty K = 1.5 m/s²
1.8 m
approx. 2.0 kg
WallPerfect W 615 I-Spray
, 50 Hz
~