Model assembly
Installation of the main wing
1. Slide the wing spar into the fuselage pass-through.
Installation of armaments
1. The included missiles slide fore-aft onto the wings
as shown.
Installation of the nose cone and pitot tube
1. The pitot tube is secured onto the nose cone by
rotating it in a counter-clockwise direction. The nose
cone slides onto the front of the fuselage as shown.
2. Connect the wing servo leads to the servo leads
located on the fuselage. Slide the wing halves over the
spar and secure using the included screw.
HKM3.0*10mm