Modster Arrows HOBBY Twin 64mm Mikoyan MiG-29 Bedienungsanleitung Seite 14

Introduction
The Russian Mikoyan MiG-29 (NATO reporting name: Fulcrum) is a fourth-generation, twin engined air-superiority fighter.
Developed in the 1970s by the Mikoyan design bureau (now the Russian Aircraft Corporation MIG), the legendary MiG-29
and the larger Sukhoi Su-27 were developed to counter American F-15 and F-16 fighter aircraft.
Arrows hobby has once again utilized all of its engineering and testing experience in developing the dual-64mm EDF
MiG-29; confident that this is a MiG-29 that will surpass the performance and features of any other R/C MiG-29 on the
market today.
Performance- dual 12-bladed 64mm EDFs and dual- 40 amp ESCs provide ample thrust for the Arrows MiG-29. With exhil-
arating high-speed and vertical performance along with the turbine-like sound wave, this is certainly the cutting edge of R/C
aviation.
Scale features: Functional LEDs, full flying horizontal stabilizer and full-metal shock-absorbing undercarriage provide func-
tional realism; while a detailed cockpit, panel lines, removable armaments, pilot figure and scale trim scheme allow the
aircraft to look like the real thing up close.
Despite the complex structure of the Arrows MiG-29, the aircraft comes prebuilt from the factory. Experienced pilots will find
that the assembly process is easy and straight-forward, taking as little as 15 minutes to complete.
For pilots that have mastered the Marlin and are looking for something in the scale-department, the aggressive MiG-29 is
not to be missed!
Features:
• Ample thrust courtesy of dual out-runner 64mm 12-bladed
fans,dual 40A ESCs and 6S power.
• Highly realistic functional and scale features.
• CNC machined-metal shock-absorbing undercarriage.
Table of contents
Introduction
················································
Specifications
··············································
Kit contents
···············································
Model Assembly
··········································
Battery installation
········································
Receiver diagram
····· ········· ···························
Preflight check
············································
Clevis installation
········································
Control horn and servo arm settings
Center of gravity(CG)
Before flying the model
Flying course
·············································
Trouble shooting
········································· 10
Spare parts list content
Kit contents
Before assembly, please inspect the contents of the kit. The photo below details the contents of the kit with labels. If any
parts are missing or defective, please identify the name or part number (refer to the spare parts list near the end of the
manual) then contact your local shop.
A.
E.
A: Fuselage
B: Horizontal stabilizer
·················
···································
··································
································· 10
B.
F.
C: Main wing
D: Vertical stabilizer
• Electric retracts with over-current protection
• High-quality rubber tires
• Bearing-equipped full-flying horizontal stabilizer
• Preinstalled ball-linked linkages for precise surface
movements
Specifications
3
3
Wingspan
3
Overall length
4
Flying weight
6
Motor size
6
6
Wing load
7
Wing area
8
ESC
8
8
9 Servo
Recommended battery
C.
G. H.
E: Armament
F: Wing spar
906mm(35.7in)
1358mm(53.5in)
~ 2500g
2840-kv2280
111g/dm²
22.5dm²
Twin 40A ESC with 5.5V
5A BEC
9g plastic servo x6
9g metal servo x3
22.2V 3300mAh 35C
D.
I.
G: Nose cone I: Screw set
（HKM3.0*10x6）
H:Pitot tube