Menu
7 Installer setup Service setup
Pump maximum speed
7.1
To set the maximum speed of
the pump.
Dry concrete
7.2
To dry the concrete (fl oor, walls,
etc.) during construction.
Do not use this menu for any
other purposes and in period
other than during construction
Default Setting
Setting Options / Display
Sterilization: Ope. time (max)
Set sterilizing time
0:10
(in hours and minutes)
Force DHW:Start Temp.
Set auto Force DHW
35 °C
activate temperature
Setting the fl ow rate, max. duty and operation
ON/OFF of the pump.
Flow rate: XX:X L/min
Max. Duty: 0x40 ~ 0xFE,
Pump: ON/OFF/Air Purge
Edit to set the temperature of dry concrete.
ON / Edit
Edit
Heating temperature
for drying the
Stages: 1
concrete.
Temperature: 25 °C
Select the desired
stages: 1 ~ 10,
range: 1 ~ 99
ON
Confi rm the setting temperatures of dry
concrete for each stage.
EN
33