Privacy - Samsung SCC-C4205 Gebrauchsanleitung

✔
AUTO...
Depending on illumination, it is automatically switched to
the COLOR or BW mode. In the poor illumination
environment, turns IR Filter off to convert to the Black-and-
White mode for better sensitivity and in the good
illumination environment, turns it on to convert to the
COLOR mode for worse sensitivity. Select AUTO and press
[Enter] and the AUTO BW submenu will appear to control
the BW level. Depending on ON or OFF, the BURST signal
may output or no. It also sets up the duration for conversion
and the brightness level for the conversion from the COLOR
mode to the BW mode. Duration options are 10Sec.,
30Sec., 1Min., and 5Min.. In the BW mode, the WHITE BAL
menu will be marked --- to make setup unavailable.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC ---
WHITE BAL ATW1
FOCUS MODE AF
MOTION DET OFF
COLOR/BW AUTO...

PRIVACY

OFF
SPECIAL ...
PRESET ...
EXIT QUIT
- ALARM ON : It sends out signals through the ALARM output
port in the BW mode.
- ALARM OFF : The ALARM output port is synchronized with the
MOTION DET finction regardiess of the COLOR/BW mode.
- BURST ON : The color burst signal is output together with
black and white composite video signal.
BURST OFF : The color burst signal is not output.
- LEVEL : You can set the brightness level that changes from
COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and HIGH.
- DWELL TIME : Set the HOLDING time for switching between
COLOR and BW mode depending the changes in the
amount of light. You can set the HOLDING time to 10sec
(S), 30sec, 60sec, or 300sec( L).
❖ In AUTO mode, AGC will operates in high speed mode, and
you cannot change it manually, as it is indicated by "---".
25
All manuals and user guides at all-guides.com
(AUTO)
Press the
ENTER
BURST ON
button.
LEVEL MEDIUM
DURATION S ---I--- L
RET
✔
EXT...
This menu automatically converts the COLOR Mode into
the BW Mode or vice versa depending on illumination with
an external sensor. If you select the EXIT menu and press
the [Enter] key, the EXTERNAL BW submenu will appear
on the menu screen. You will be able to send out the
BURST signal by turning on or off in this menu.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE AF
Press the
MOTION DET OFF
ENTER
COLOR/BW EXT...
PRIVACY OFF button.
SPECIAL ...
PRESET ...
EXIT QUIT
❙
PRIVACY
This function designates an area that may violate PRIVACY
and hides it when the camera shoots a screen including the
area to protect Privacy. Up to 8 PRIVACY ZONEs are
available for setup. After PRIVACY menu setup, press
ENTER to enter the PRIVACY MAP screen. Now, press
UP/DOWN/LEFT/RIGHT key to choose one out of PRIVACY
0~7 and press ENTER to enter the PRIVACY setup menu.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC ---
WHITE BAL ATW1
FOCUS MODE AF
MOTION DET OFF
Press the
COLOR/BW AUTO...
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
(EXT)
BURST ON
RET
(PRIVACY MAP)
0 1 2 3
4 5 6 7
ENTER
button.
RET
E
26