Copy A Job; Delete A Job - FP i 4800 Betriebsanleitung

4. Tap the arrow buttons [>] to pass the other job definition steps and close the job editor.
5. Tap [Save] to save the changes.
6. Tap [1x] to make sure that the Insert Position and Address Position are correct
(see Verifying the Insert Position
page 46).

Copy a Job

To copy existing job settings to a new job:
1. Tap and hold the job in the Job list. A pop-up screen will appear.
2. Tab [Copy].
3. Enter the name of the new job and tab [√].

Delete a Job

To delete an existing job:
1. Tap and hold the job in the Job list.
on page 43 and Adjusting the Address Position on
4
57