Operator Maintenance; Maintenance Schedule - FP i 4800 Betriebsanleitung

9

Operator Maintenance

Maintenance Schedule

Maintenance
frequency
Daily
9
Weekly
When neces-
sary
124
Disconnect the mains power supply before performing any
maintenance.
The user must not attempt to service the appliance beyond that
described in this operator manual. All other servicing must be carried
out by qualified service personnel only.
Please contact your authorized distributor.
Maintenance
• Check the system functions.
• Keep the system in proper condition by removing dust, paper re-
mains, etc.
The machine is delivered with an extra set of brushes.
To always have one clean set available, it is recommended to soak one
set in water and use the other set.
• When dirty or saturated, clean the brushes of the envelope sealing
or replace them (see
• When dirty or saturated, clean the moistening cloth or replace if
necessary (see
• Clean feed and insert rollers as instructed by the Service Engineer.
When the display warns about dusty sensors, clean the applicable
sensors. After cleaning, always calibrate the photocells (see
photocells on page 127).
Clean and replace brushes
Replace moistening cloth
on page 125).
on page 126).
Calibrate