4.
Tap [Advanced].
5.
Tap Double Feed Control to switch it on or off.
6.
Confirm the settings by tapping [Select] and continue with the document settings.
Select an Enclosure
1.
Tap [Add enclosure].
2.
Select a predefined document or create a custom document as your enclosure (see
Create a custom document)
If you want to remove an enclosure from the job, or change the order of the enclosures,
see
Delete or move an enclosure
3.
Change the [Number] for more than one document from a feeder.
4.
Confirm the enclosure settings by tapping [Select].
on page 52.
on page 56.
4
33