Zelmer ZMM3501B Benutzerhandbuch Seite 13

EN
PL
Operating the sausage stuffer
Insert the following parts into the mincer body: Insert the scroll with the coupling facing inside. Fit the insert
onto the pin of the scroll.
Fit the sausage stuffing tube.
Tightly fit all the elements with the threaded ring. Fit the assembled mincer unit onto the drive unit and turn
it until you hear a click of the lock.
Place the tray on the mincer body.
Soak the casing for about 10 minutes before fitting. Fit the wet casing on the sausage filler nozzle.
NB: Make sure not to block the ventilation openings on the nozzle.
NB2: The meant cannot be "too thin". A large liquid content may cause its leakage to the inside of the
mincer.
Shredder
The shredder is equipped with 2 or 3 discs. The first, for grating into chips (cheese, carrots, celery, roast
beetroot, etc.). The second disc (slicing disc) is used for grating vegetables (potatoes, onions, cucumbers,
etc.). The third cutting disc (drum disc) is used for mashing vegetables (potatoes, beetroot, etc.) and fruit.
Operating the shredder
Assemble the chamber of the shredder just as like mincing chamber.
Place the required cutting rolls on feeding tube, make sure the bottom of cutting rolls is tightly compacted
to the salad tube.
Cut large products into smaller elements, which you can easily put into the mincing chamber.
Do not mash soft fruits containing stones.
When the work is finished pull the power cord out from the network supply \socket.
Remove the food remaining in the shredder chamber or on the grater with a wooden spoon.
NB: blades of the disc do not require any regeneration.
Operating the juice extractor
Please follow the picture on the way to the tomatoes accessories installed.
Insert the following parts into the mincer body:
Insert the scroll with the coupling facing inside. Fit the insert onto the pin of the scroll.
Fit the juicer screw and juicer chamber
Tightly fit all the elements with the threaded ring
Fit the assembled mincer unit onto the drive unit and turn it until you hear a click of the lock.
Place the juicer anti splash protector
Chop in tomatoes firstly. Turn on the power switch and make sure the equipment moves all right before put.
Use food pusher. Use the juicer regulator screw to regulate the release of pulp.
Mechanical safety device for the motor
The meat mincer is equipped with mechanical protection, which secures the motor against any damage –
teeth of the coupling break, when the meat mincer is overloaded (f. ex. when bones have entered into the
mincing chamber).
The broken coupling should be replaced with a new one:
- unscrew the coupling from the feed screw,
- remove the broken coupling
- put on the new coupling and screw it.
13