Important Warnings; Meat Grinder - Zelmer ZMM3501B Benutzerhandbuch

PL EN

IMPORTANT WARNINGS

This appliance is designed for home use and should never be used for commercial or industrial use under
any circumstances. Any incorrect use or improper handling of the product shall render the warranty null
and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and/or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle Unplug the product immediately
from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs
or procedures on the device. This appliance is designed for home use and should never be used for
commercial or industrial use under any circumstances. Any incorrect use or improper handling of the produc
shall the warranty null and void.
Prior to plugging in the product, check that your mains is the same as the one indicated on the product label.
Check the filter every time before squeezing. Do not use the juicer any more in case of any cracks or
damage, and get in touch with the nearest dealer and manufacturer.
B&B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
INSTRUCTIONS FOR USE

Meat Grinder

The continuous operation should not exceed 10 minutes; suspend the operation in the event of exceeding
10 minutes and restart the machine after cooling down.
Preparing the meat mincer to work and the actuation of the appliance
Place the drive unit close to the power network socket, on a firm surface so as not to cover the ventilation
holes within the casing.
Before the first use of the meat mincer, wash the equipment elements.
Assemble the appropriate equipment and join it with the drive unit.
Plug in the unit.
Turn the meat mincer on with the main switch
Operating the mincing set
Insert the following parts into the mincer body :
Insert the scroll with the coupling facing inside. Fit the knife onto the pin of the scroll. Make sure the blade
is outward (failure will be caused for incorrect placement)
Place the disc over the knife so that the protrusion in the mincer body will fit into the groove in the
circumference of the disc.
Tightly fit all the elements of the mincer unit.
Fit the assembled mincer unit onto the drive unit and turn it until you hear a click of the lock. It means that
the body has been properly installed.
Place the tray on the mincer chamber
NB: Use only the pusher to push products.
12