Installation Instructions - La Sommeliere VN50 Gebrauchsanweisung

To find out more about your product, consult the online EPREL database. As defined in Commission
Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration appliance is available on
the EPREL Base (European Product Database for energy labeling). This database enables you to consult
the information and technical documentation of your refrigeration appliance. You can access the EPREL
Database by scanning the QR code on the energy label of your appliance or by going directly to:
www.ec.europa.eu and searching the reference of your refrigeration appliance.
Announced capacity
The advertised capacity is the maximum capacity calculated with a defined number of shelves which
varies depending on the model. This standard is calculated with 75cl traditional Bordeaux type bottles. Any
other type of bottle format as well as the addition of shelves will considerably reduce the storage capacity.
3.

INSTALLATION INSTRUCTIONS

When selecting a location for your appliance you should make sure the floor is flat and firm, and the room is well
ventilated. An average ambient temperature must be observed. This temperature is specific according to the
climatic class of the device: N : This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 32 °C
Before using this appliance
▪
Remove the exterior and interior packing.
▪
Before connecting the appliance to the power source, let it stand upright for approximately 24 hours. This
will reduce the possibility of a malfunction in the cooling system from handling during transportation.
▪
Clean the interior surface with lukewarm water using a soft cloth.
▪
When disposing your appliance, please choose an authorized disposal site.
▪
Place your wine cooler on a floor that is strong enough to support it when it is fully loaded. To level your
Wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
▪
Adequate ventilation is required, do not block the front air outlet.
▪
This wine cellar is designed for free-standing only, in no case it must be installed in a built-in or
embeddable way. For a good functionality of the device it is imperative to leave a good air circulation all
around the device. We do not take responsibility for failure to comply with the installation instructions.
▪
Connect the appliance to a single socket, leaving enough space for ventilation around the appliance. Be
careful to support it, so that your wine cellar is perfectly level (use of a spirit level is recommended). This will
prevent any movement due to instability, causing noise and vibration, and will ensure that the door seals
perfectly.
▪
This appliance is intended to be used exclusively for the storage of wine.
▪
This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Caution
▪
Store wine in sealed bottles.
▪
Do not overload the cabinet.
▪
Do not open the door unless necessary.
▪
Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation.
▪
Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged, and
after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to avoid possible
condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
15