4.
UTILISATION INSTRUCTIONS
The temperature of the device is adjustable between 5°C to 20°C. The temperature is regulated by a
thermostat. Changing the temperature generates higher energy consumption.
The appliance assures that temperature is maintained as long as it is in operation and that it is used in
normal conditions of use. The temperature inside the appliance and its energy consumption can be
influenced by many factors: ambient temperature, exposure to the sun, number of door openings and
quantity stored... Slight changes in temperature are perfectly normal.
➢
Display board
➢
Temperature setting
To adjust the temperature, press the arrows
the temperature by 1 ° C. Please note that the temperature is displayed on the screen is always the
temperature measured by the probe.
For example, if the previously set temperature was 12 ° C and then change the setting to 8, the display will
return to 12 ° C and then gradually down to 8 ° C to 8 ° C display when it is reached.
➢
Inside lighting
To turn on or turn off the interior light, press
automatically after 10 minutes.
➢
Change de bulb
▪
Remove the light bulb cover (4) by pulling the bottom end of the light bulb cove gently
▪
Remove the tow screws (2)
▪
Remove the Pcb board (1)
▪
Replace the light bulb cover (4)
Note: all parts removed must be saved to do the replacement of the light bulb. Before removing the light
bulb, either unplug the cellar or disconnect the electricity leading into the cellar at the main power supply.
Failure to do so could result in electrical shock or personal injury.
to increase the temperature of 1 ° C and
. If you leave the light on, the safety switches off
to decrease
16